News
Position:Index > News
The Beihai trial production of galvanizing furnace which features
Time:2014-10-24 17:38:50
The furnaces we design have foreseeability and modifiability; within a while after putting into production in commission, many galvanizing factories will find out that their zinc pots are not ideal for use, and want to increase the width or length; the furnaces must be retrofitted spending a large amount of money and suffering long-term shut-down, which will bring unnecessary troubles.
After we are aware of your future needs, we will customize your furnaces; now you just pay a small amount of money and only one week of construction period will be enough for your modification of the furnace dimensions, which only takes tiny changes to the furnaces. All you have to do is to tell your predicted zinc pot dimensions and leave the rest to us; and we will take advantage of the most advanced and scientific way to take care of your troubles and concerns.
Currently, the advanced galvanizing furnaces usually use gas fuel, for which can be fully combusted, have high thermal utilization factor and be in favor of automatic control temperature. On the other hand, using coal as fuel means lower cost, but it is not as good as gas fuel in thermal utilization factor or product quality & environmental protection. Burner in furnace is the key device for fuel combustion and also an important device to decide if the temperature of cross section in galvanizing furnace is uniform.
A poor burner structure will lead to unstable flame and deformation of the zinc pot. While a good burner can allow the fuel to be fully combustible even with low combustion air surplus coefficient; the stable and easy-to-adjust flame will help you fulfill the purpose of energy saving. During furnace commissioning, the surplus air volume shall be controlled to the minimum; or the fuel consumption will be increased.
After we are aware of your future needs, we will customize your furnaces; now you just pay a small amount of money and only one week of construction period will be enough for your modification of the furnace dimensions, which only takes tiny changes to the furnaces. All you have to do is to tell your predicted zinc pot dimensions and leave the rest to us; and we will take advantage of the most advanced and scientific way to take care of your troubles and concerns.
Currently, the advanced galvanizing furnaces usually use gas fuel, for which can be fully combusted, have high thermal utilization factor and be in favor of automatic control temperature. On the other hand, using coal as fuel means lower cost, but it is not as good as gas fuel in thermal utilization factor or product quality & environmental protection. Burner in furnace is the key device for fuel combustion and also an important device to decide if the temperature of cross section in galvanizing furnace is uniform.
A poor burner structure will lead to unstable flame and deformation of the zinc pot. While a good burner can allow the fuel to be fully combustible even with low combustion air surplus coefficient; the stable and easy-to-adjust flame will help you fulfill the purpose of energy saving. During furnace commissioning, the surplus air volume shall be controlled to the minimum; or the fuel consumption will be increased.