Position：Index > News
Dust treatment equipment for hot dip galvanizing
The dust treatment equipment is used to absorb all kinds of dust with the diameter of 0.01 m~100 mu m, using the water curtain between multi layers and different curtain. The equipment is tested by the environmental protection technology detection center of Beijing middle research ring and has the MA detection report.
The principle of dust treatment equipment: the water pump conveyed the water to the reservoir, and through the different numbers of holes and crevices on the sink into the filter network, the water film of a certain thickness was formed. When the dust gas and the acid gas which is easily dissolved in water through a filter, the water film forms a variety of States, such as water mist, water droplet and so on. When the particles are in contact with them, the liquid is condensed on the particles of the dust particles, increasing the quality of the particles, making it landing, or when the gas is impacted by the wall of the shell, and the liquid will be contained. The dust particles with water are precipitated in the bottom slot, when a certain amount is reached, the dust valve is opened and the water is discharged. The dry dust particles are obtained by separating the water in the dust particles through the centrifuge. The filtered gas removes the remaining water through the baffle plate and exhausting the clean gas into the atmosphere through the exhaust pipe.
Choose the hot-dip galvanizing equipment and choose Beihai galvanized. Beihai galvanized hot dip galvanizing equipment, in the dust treatment equipment to strive for perfection, and strive to create every perfect detail.